MICRO NUTRUNNER
The Micro nutrunners are the smallest and lightest nutrunner in the industry. Able to be synchronized, these small, but mighty tools can tackle the production demands of the electronics industry.
| Model | Controller | Torque Range (Nm / in*lb) |
Speed (rpm) |
Min. C-C (mm) |
Installation Length* (mm / in) |
Weight (kg / lb) |
Square Drive | 2-D Print (pdf) |
2-D Drawing (dxf) |
3-D Model (stp) |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| MFT-080M10-S1 | MFC-S008 | 0.2 – 0.8 / 1.77 – 7.08 | 2220 | 31 | 181.5 / 7.15 | 0.68 / 1.5 | 1/4″ Hex | MFT-080M10-S1.pdf | MFT-080M10-S1.dxf | MFT-080M10-S1.stp | |
| MFT-160M10-S | MFC-S008 | 0.4 – 1.6 / 3.54 – 14.16 | 1250 | 31 | 181.5 / 7.15 | 0.68 / 1.5 | 1/4″ Hex | MFT-160M10-S.pdf | MFT-160M10-S.dxf | MFT-160M10-S.stp | |
| MFT-240M10-S | MFC-S008 | 0.6 – 2.4 / 5.31 – 21.24 | 800 | 31 | 181.5 / 7.15 | 0.68 / 1.5 | 1/4″ Hex | MFT-240M10-S.pdf | MFT-240M10-S.dxf | MFT-240M10-S.stp | |
| *Installation length does not include the cable | |||||||||||
| Cable exits the top of the nutrunner | |||||||||||
STANDARD CONNECTOR – STRAIGHT NUTRUNNER
The CFT straight nutrunner is a workhorse. They provide the accuracy and repeatability needed in modern production. Additional tools and options are available upon request.
| Model | Controller | Torque Range (Nm / ft*lb) |
Speed (rpm) |
Min. C-C (mm) |
Installation Length* (mm / in) |
Weight (kg / lb) |
Square Drive | 2-D Print (pdf) |
2-D Drawing (dxf) |
3-D Model (stp) |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| CFT-051RS1-S | MFC-S024 | 1 – 5 / 0.7 – 3.7 | 1330 | 41 |
263.4 / 10.37
|
1.16 / 2.6
|
3/8″ | CFT-051RS1-S.pdf | CFT-051RS1-S.dxf | CFT-051RS1-S.stp | |
| CFT-101RS1-S | MFC-S024 | 2 – 10 / 1.5 – 7.4 | 3000 | 39 |
268.4 / 10.57
|
1.26 / 2.8
|
3/8″ | CFT-101RS1-S.pdf | CFT-101RS1-S.dxf | CFT-101RS1-S.stp | |
| CFT-201RS1-S | MFC-S024 | 4 – 20 / 3 – 14.8 | 1293 | 39 |
283.4 / 11.16
|
1.42 / 3.1
|
3/8″ | CFT-201RS1-S.pdf | CFT-201RS1-S.dxf | CFT-201RS1-S.stp | |
| CFT-281RS1-S | MFC-S024 | 5.6 – 28 / 4.1 – 20.7 | 992 | 39 |
286.4 / 11.28
|
1.42 / 3.1
|
3/8″ | CFT-281RS1-S.pdf | CFT-281RS1-S.dxf | CFT-281RS1-S.stp | |
| CFT-401RS1-S | MFC-S024 | 8 – 40 / 5.9 – 29.5 | 712 | 39 |
286.4 / 11.28
|
1.42 / 3.1
|
3/8″ | CFT-401RS1-S.pdf | CFT-401RS1-S.dxf | CFT-401RS1-S.stp | |
| CFT-801RS3-S | MFC-S060 | 16 – 80 / 11.8 – 59 | 1015 | 50 |
359.4 / 14.15
|
3.4 / 7.5
|
1/2″ | CFT-801RS3-S.pdf | CFT-801RS3-S.dxf | CFT-801RS3-S.stp | |
| CFT-132RS3-S1 | MFC-S060 | 26 – 130 / 19.2 – 95.9 | 574 | 50 |
359.4 / 14.15
|
3.4 / 7.5
|
1/2″ | CFT-132RS3-S1.pdf | CFT-132RS3-S1.dxf | CFT-132RS3-S1.stp | |
| CFT-202RS3-S | MFC-S060 | 40 – 200 / 29.5 – 147.5 | 387 | 59 |
371.4 / 14.62
|
4.3 / 9.5
|
5/8″ | CFT-202RS3-S.pdf | CFT-202RS3-S.dxf | CFT-202RS3-S.stp | |
| CFT-302RS3-S | MFC-S060 | 60 – 300 / 44.3 – 221.3 | 260 | 71 |
418.4 / 16.47
|
5.8 / 12.8
|
3/4″ | CFT-302RS3-S.pdf | CFT-302RS3-S.dxf | CFT-302RS3-S.stp | |
| CFT-502RM4J-S | MFC-S120 | 100 – 500 / 73.8 – 368.8 | 238 | 88 |
450 / 17.72
|
13.5 / 29.8
|
1″ | CFT-502RM4J-S.pdf | CFT-502RM4J-S.dxf | CFT-502RM4J-S.stp | |
| CFT-802RM4J-S | MFC-S120 | 160 – 800 / 118 – 590 | 150 | 95 |
516 / 20.31
|
15 / 33.1
|
1″ | CFT-802RM4J-S.pdf | CFT-802RM4J-S.dxf | CFT-802RM4J-S.stp | |
| CFT-113RM4J-S | MFC-S120 | 220 – 1100 / 162.3 – 811.3 | 120 | 98 |
538 / 21.18
|
22 / 48.5
|
1 1/2″ | CFT-113RM4J-S.pdf | CFT-113RM4J-S.dxf | CFT-113RM4J-S.stp | |
| CFT-153RM4J-S | MFC-S120 | 300 – 1500 / 221.3 – 1106.3 | 88 | 114 |
553 / 21.77
|
28.5 / 62.8
|
1 1/2″ | CFT-153RM4J-S.pdf | CFT-153RM4J-S.dxf | CFT-153RM4J-S.stp | |
| *Installation length does not include the cable | |||||||||||
| Cable exits the top of the nutrunner | |||||||||||
HIGH SPEED SEATING – STRAIGHT NUTRUNNER
The CFT straight high-speed seating nutrunner is ideal for beating cycle times. The tool has an internal dampener that minimizes overshoot in high speed, hard joint applications.
| Model | Controller | Torque Range (Nm / ft*lb) |
Speed (rpm) |
Min. C-C (mm) |
Installation Length* (mm / in) |
Weight (kg / lb) |
Square Drive | 2-D Print (pdf) |
2-D Drawing (dxf) |
3-D Model (stp) |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| CFT-101RS1-S-H | MFC-S024 | 2 – 10 / 1.5 – 7.4 | 3000 | 39 | 290.4 / 11.43 |
1.39 / 3.1
|
3/8″ | CFT-101RS1-S-H.pdf | CFT-101RS1-S-H.dxf | CFT-101RS1-S-H.stp | |
| CFT-201RS1-S-H | MFC-S024 | 4 – 20 / 3 – 14.8 | 1293 | 39 |
305.4 / 12.02
|
1.5 / 3.3
|
3/8″ | CFT-201RS1-S-H.pdf | CFT-201RS1-S-H.dxf | CFT-201RS1-S-H.stp | |
| CFT-281RS1-S-H | MFC-S024 |
5.6 – 28 / 4.1 – 20.7
|
992 | 39 |
308.4 / 12.14
|
1.55 / 3.4
|
3/8″ | CFT-281RS1-S-H.pdf | CFT-281RS1-S-H.dxf | CFT-281RS1-S-H.stp | |
| CFT-401RS1-S-H | MFC-S024 | 8 – 40 / 5.9 – 29.5 | 712 | 39 |
308.4 / 12.14
|
1.55 / 3.4
|
3/8″ | CFT-401RS1-S-H.pdf | CFT-401RS1-S-H.dxf | CFT-401RS1-S-H.stp | |
| CFT-801RS3-S-H | MFC-S060 |
16 – 80 / 11.8 – 59
|
1015 | 50 |
383.4 / 15.09
|
3.4 / 7.5
|
1/2″ | CFT-801RS3-S-H.pdf | CFT-801RS3-S-H.dxf | CFT-801RS3-S-H.stp | |
| CFT-132RS3-S1-H | MFC-S060 |
26 – 130 / 19.2 – 95.9
|
574 | 50 |
383.4 / 15.09
|
3.4 / 7.5
|
1/2″ | CFT-132RS3-S1-H.pdf | CFT-132RS3-S1-H.dxf | CFT-132RS3-S1-H.stp | |
| *Installation length does not include the cable | |||||||||||
| Cable exits the top of the nutrunner | |||||||||||
| Nutrunners designed for critical applications with hard joints and short cycle times | |||||||||||
L-Style Connector – STRAIGHT NUTRUNNER
The CFT straight L-style connector nutrunner uses a cable connection that is 180 degree connection making it even more compact, with the same performance as the regular version.
| Model | Controller | Torque Range (Nm / ft*lb) |
Speed (rpm) |
Min. C-C (mm) |
Installation Length* (mm / in) |
Weight (kg / lb) |
Square Drive | 2-D Print (pdf) |
2-D Drawing (dxf) |
3-D Model (stp) |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| CFT-051RS1-SL | MFC-S024 |
1 – 5 / 0.7 – 3.7
|
1330 | 41 |
231 / 9.09
|
1.2 / 2.6
|
3/8″ | CFT-051RS1-SL.pdf | CFT-051RS1-SL.dxf | CFT-101RS1-SL.stp | |
| CFT-101RS1-SL | MFC-S024 |
2 – 10 / 1.5 – 7.4
|
3000 | 39 |
236 / 9.29
|
1.26 / 2.8
|
3/8″ | CFT-101RS1-SL.pdf | CFT-101RS1-SL.dxf | CFT-101RS1-SL.stp | |
| CFT-201RS1-SL | MFC-S024 |
4 – 20 / 3 – 14.8
|
1293 | 39 |
251 / 9.88
|
1.42 / 3.1
|
3/8″ | CFT-201RS1-SL.pdf | CFT-201RS1-SL.dxf | CFT-201RS1-SL.stp | |
| CFT-281RS1-SL | MFC-S024 |
5.6 – 28 / 4.1 – 20.7
|
992 | 39 |
254 / 10
|
1.42 / 3.1
|
3/8″ | CFT-281RS1-SL.pdf | CFT-281RS1-SL.dxf | CFT-281RS1-SL.stp | |
| CFT-401RS1-SL | MFC-S024 |
8 – 40 / 5.9 – 29.5
|
712 | 39 |
254 / 10
|
1.42 / 3.1
|
3/8″ | CFT-401RS1-SL.pdf | CFT-401RS1-SL.dxf | CFT-401RS1-SL.stp | |
| CFT-801RS3-SL | MFC-S060 |
16 – 80 / 11.8 – 59
|
1015 | 50 |
329 / 12.95
|
3.5 / 7.7
|
1/2″ | CFT-801RS3-SL.pdf | CFT-801RS3-SL.dxf | CFT-801RS3-SL.stp | |
| CFT-132RS3-S1L | MFC-S060 |
26 – 130 / 19.2 – 95.9
|
574 | 50 |
329 / 12.95
|
3.4 / 7.5
|
1/2″ | CFT-132RS3-S1L.pdf | CFT-132RS3-S1L.dxf | CFT-132RS3-S1L.stp | |
| CFT-202RS3-SL | MFC-S060 |
40 – 200 / 29.5 – 147.5
|
387 | 59 |
341 / 13.43
|
4.3 / 9.5
|
5/8″ | CFT-202RS3-SL.pdf | CFT-202RS3-SL.dxf | CFT-202RS3-SL.stp | |
| CFT-302RS3-SL | MFC-S060 |
60 – 300 / 44.3 – 221.3
|
260 | 71 |
388 / 15.28
|
5.8 / 12.8
|
3/4″ | CFT-302RS3-SL.pdf | CFT-302RS3-SL.dxf | CFT-302RS3-SL.stp | |
| Cable exit adjustable in 90 degree increments | |||||||||||
NOT SEEING THE TOOL YOU’RE LOOKING FOR?
Contact MC Fastening Solutions for assistance.